Error Messages

7PRIVSALLOW, Only seven privileges are allowed in one event

You specified more than seven privileges in a PRIV_CHECK event which allows a maximum of seven. Please specify seven or fewer privileges.

AUTHNOTFOUND, Authorized user: username was not found in Authorized list

The specified username was not found in the authorized list. Please check for typing or spelling mistakes, and re-enter the command.

AUTOIMGEXISTS, Autohit image_name already exists in Autohit list

The image name you specified in the /AUTOHIT/IMAGE qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

AUTUSEEXISTS, Authorized user username already exists in Authorized list

The username you specified in the /AUTHORIZED/USER qualifier already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

BADWEEKDAY, Invalid weekday or weekday keyword specified, please call Saiga Systems

The keyword you specified for /DAY is invalid. This may indicate an internal error in HITMAN. Please call Saiga Systems.

BLOCKSTOLNG, Specified free blocks text was too long, value truncated to 10 characters

The free blocks text you entered was too long to contain a valid number of blocks. Please omit leading blanks and re-enter the command.

CLASSTOOLNG, Specified operator class text was too long, value truncated to 8 characters

The operator class text you entered was too long to contain a valid operator class. Please omit leading blanks, check for typing or spelling mistakes, and re-enter the command.

CMDIGNORED, The last hitman command is ignored since a data collection is running

The last command entered was requesting action from the detached process. The detached process was in the middle of a data collection and therefore the command was ignored. Please re-enter the command.

DESCTOOLNG, Specified description text was too long, value truncated to 50 characters

The event description text you entered was too long. Please omit leading blanks, check for typing or spelling mistakes, and re-enter the command.

DETACHNOTRUN, HITMAN's detached process is not running, this is required for dump

You have issued a /DUMP/USER command and the HITMAN detached process is not running. Start HITMAN and re-issue the /DUMP/USER command.

DEVICEREQ, Device required for this event

A device name is required when entering a Check_free or Error event. Please check for typing or spelling mistakes, and re-enter the command.

DEVNAMTOLNG, Specified device name was too long, this field can only accept 59 characters

The device name you entered was too long. Please omit leading blanks, check for typing or spelling mistakes, and re-enter the command.

DSTLSTTOLNG, Specified distribution list is more than 39 characters, please re-enter

The distribution list text you entered is too long. Please check for typing or spelling mistakes, and re-enter the command.

ERRCENTEXT, Error centring text in SMG display

There has been an error centring text in the SMG display. Check if you have entered a string greater than 78 characters.

ERRCLOLIS, Error closing list file

An error occurred while closing the listing file. The error message that follows will further explain the problem.

ERRCLOLOG, Error closing log file

An error occurred while closing the log file. The error message that follows will further explain the problem.

ERRCLOMAI, Error closing mail message text file

An error occurred while closing the temporary mail message file. The error message that follows will further explain the problem.

ERRCLOPERM, Error closing permanent data file

An error occurred while closing the permanent data file. The error message that follows will further explain the problem.

ERREADLOGFIL, There has been an error reading the log file

An error occurred while reading the log file. The error message that follows will further explain the problem.

ERROPEAUDIT, Error opening audit file

An error occurred while opening the audit file. The error message that follows will further explain the problem.

ERROPEDUMP, Error opening dump file for output

An error occurred while opening the output file for the dump command. The error message that follows will further explain the problem.

ERROPELIS, Error opening list file

An error occurred while opening the listing file. The error message that follows will further explain the problem.

ERROPELOG, Error opening log file

An error occurred while opening the log file. The error message that follows will further explain the problem.

ERROPEMAI, Error opening mail message text file

An error occurred while opening the temporary mail message file. The error message that follows will further explain the problem.

ERROPEPERM, Error opening permanent data file

An error occurred while opening the permanent data file. The error message that follows will further explain the problem.

ERRREAPERM, Error reading permanent data file

An error occurred while reading from the permanent data file. The error message that follows will further explain the problem.

ERRSETAST, Error setting up mailbox AST

An error occurred while creating the mailbox link to the detached process. The error message that follows will further explain the problem.

ERRSTRTDET, Error starting detached process

An error occurred while starting the detached process. Please check HITMAN_DAT:HITMAN_ERROR.node_name for error messages.

ERRWRITLIS, Error writing list file

An error occurred while writing to the listing file. The error message that follows will further explain the problem.

ERRWRITLOG, Error writing log file

An error occurred while writing to the log file. The error message that follows will further explain the problem.

ERRWRITMAI, Error writing mail message

An error occurred while writing the temporary mail message. The error message that follows will further explain the problem.

ERRWRITPERM, Error writing permanent data file

An error occurred while writing to the permanent data file. The error message that follows will further explain the problem.

EXITEXISTS, Image image_name already exists in the image exit list

The image name you specified is already in the exit list. Please check the name and re-enter the command.

EXTRAIMGINFO, Extra image name information provided, only file name used

The image name you specified contained more than an image name. Only the file name was used. No action necessary.

FILENAMTOLNG, Specified file name was too long, truncated to 50 characters

The file name you specified was too long. Filename was truncated to 50 characters. No action necessary.

FIRGEWAIT, First warn time is greater than or equal to wait time

The first warn time must be less than the wait time. Please check for typing or spelling mistakes, and re-enter the command.

FNF, File filename not found

A file you specified does not exist. Please check for typing or spelling mistakes, and re-enter the command.

FREEREQ, Free blocks required for this event

The number of free blocks is required when entering a check free event. Please check for typing or spelling mistakes, and re-enter the command.

HMREQ, Please specify the hours and minutes hh:mm

Please specify the start or end time in the format HH:MM. There must be at least four characters. Here are some examples: "5:00" or "17:30".

HOLIDAYEXISTS, Holiday: date already exists in Holiday list

The date you tried to add to the holiday list is already in the list. Please check for typing or spelling mistakes, and re-enter the command.

HOLNOTFOUND, Holiday: date was not found in Holiday list

The date you tried to remove from the holiday list is not in the list. Please check for typing or spelling mistakes, and re-enter the command.

HOLTOOLONG, Holiday: date is too long

The date text you specified is too long to be a valid date. Please omit leading blanks, check for typing or spelling mistakes, and re-enter the command.

IDENTEXISTS, Identifier: identifier already exists in the Identifier list

The identifier you specified using the /PROTECT/IDENTIFIER qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IDENTNOTFOUND, Identifier: identifier was not found in the Identifier list

The identifier you specified using the /PROTECT/IDENTIFIER qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IDENTNOTVLD, Not a valid UIC identifier, please re-enter

The UIC identifier that you have entered is invalid. Please check for typing or spelling mistakes, and re-enter the command.

IDENTUIC, Identifier is a UIC, use UIC list for this identifier

The identifier you specified using the /PROTECT/IDENTIFIER qualifiers is a UIC. Use the /UIC qualifier rather than the /IDENTIFIER qualifier. Please check for typing or spelling mistakes, and re-enter the command.

IDISCNOTFOUND, Image: image_name was not found in the image disconnect list

The image you specified using the /DISCONNECT/NOIMAGE qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IDLENOTFOUND, User: username was not found in the Set Idle list

The user you specified using the /SET_IDLE/NOUSER qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IDLETOOHIGH, Idle times have been set to default

The maximum idle time you specified using the /MAX_IDLE qualifier is too high. Please check for typing mistakes, and re-enter the command.

IDLETOOLOW, Idle times have been set to default

The minimum idle time you specified using the /MIN_IDLE qualifier is too low. Please check for typing mistakes, and re-enter the command.

IDLIMGEXISTS, Idle image already exists, please re-enter

The image you specified already has wait and warning times defined. Please check for typing or spelling mistakes, and re-enter the command.

IDLSERVEXISTS, Idle server already exists, please re-enter

The server you specified already has wait and warning times defined. Please check for typing or spelling mistakes, and re-enter the command.

IDLTERMEXISTS, Idle terminal already exists, please re-enter

The terminal you specified already has wait and warning times defined. Please check for typing or spelling mistakes, and re-enter the command.

IDLUSREXISTS, Idle username already exists, please re-enter

The user you specified already has wait and warning times defined.

IMAGEEXISTS, Image: image_name already exists in the Image protect list

The image name you specified using the /PROTECT/IMAGE qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IMAGENOTFOUND, Image: image_name was not found in the Image list

The image you specified using the /PROTECT/NOIMAGE qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IMAGEREQ, Image required for this event

An image name is required for the event you are trying to enter. Please enter event with a valid image name.

IMGDISCEXISTS, Image: image_name already exists in the Image disconnect list

The image name you specified using the /DISCONNECT/IMAGE qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IMGNAMTOLNG, Specified image name was too long, truncated to 39 characters

The image name you specified was too long. Image name truncated to 39 characters. Please check for typing or spelling mistakes, and re-enter.

IMGNOTFOUND, Autohit image: image_name was not found in Autohit list

The image name you specified in the /AUTOHIT/NOIMAGE qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

IMGTHRESEXISTS, Image already exists in the Image threshold list

The image name you specified for the image threshold list already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

INDIVNOTFOUND, User: username was not found in the Individual list

The username you specified in the /NOUSER qualifier does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

INOUTREQ, This event requires /IN, /OUT or both

You must specify either IN or OUT for this event. Please add the required text and re-enter the command.

INVALIDBIO, Invalid value for runaway event BIO's

You have entered an invalid value for the runaway buffered I/O threshold. Please check for typing mistakes, and re-enter the command.

INVALIDCPU, Invalid value for runaway event CPU

You have entered an invalid value for the runaway CPU threshold. Please check for typing mistakes, and re-enter the command.

INVALIDDIO, Invalid value for runaway event DIO's

You have entered an invalid value for the runaway direct I/O threshold. Please check for typing mistakes, and re-enter the command.

INVALIDDEVICE, Invalid disk device, please re-enter

You have entered an invalid disk device. Please check for typing or spelling mistakes, and re-enter the command.

INVALIDEVENT, Invalid event type specified, please re-enter

You have tried to enter an invalid event type. Please check for typing or spelling mistakes, and re-enter the command.

INVALIDFIR, Invalid first warning, time specified must be multiple of interval

The time specified for the first warning must be a multiple of the data collection interval. Please re-enter the command.

INVALIDGROUP, Invalid UIC group, please specify between 1 and 37776

The UIC group you specified was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVALIDINT, Invalid data collection interval

The interval you specified for /UPDATE_INTERVAL is not between 1 and 60. Please check for typing or spelling mistakes, and re_enter command.

INVALIDKEY, Invalid key entered, valid keys listed in information window below

The key you pressed is not valid with this screen. The valid keys are listed at the bottom of the screen.

INVALIDMEMBER, Invalid UIC member, please specify between 0 and 177776

The UIC member you specified was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVALIDOCTAL, Invalid octal value, please re-specify

The group and/or member in a UIC contain digits other than 0-7 and is not a valid octal number.

INVALIDQUEUE, Invalid queue specified, please re-enter

The batch queue you specified was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVALIDSEC, Invalid second warning, time specified must be a multiple of interval

The time specified for the second warning must be a multiple of the data collection interval. Please re-enter the command.

INVALIDTIME, Prime start time is greater than or equal to Prime end time

The time you specified for prime start must be less than the prime end time. Please check for typing or spelling mistakes, and re_enter command.

INVALIDUPD, Invalid update interval

The update interval must be equal to or greater than the data collection interval and less than or equal to 60. Please re-enter the command.

INVALIDVAL, Invalid value, must be greater than 0

You have entered a value that is less than 0. Please enter a positive value or check for typing mistakes.

INVALIDWAIT, Invalid wait, time specified must be multiple of interval

The wait time you specified must be a multiple of the interval. Please check for typing or spelling mistakes, and enter command again.

INVALIDWARN, Invalid warn, must be between 1 and 999. Please re-enter

The warn time you specified must be a multiple of the interval. Please check for typing or spelling mistakes, and enter command again.

INVALNUMMESS, Invalid number of messages, must be between 1 and 99

You have entered an invalid number for the number of messages. Please enter a value between 1 and 99.

INVALPARAM, Invalid interval or wait time, leaving HITMAN

HITMAN stopped because either the interval is less than the minimum allowable interval or the wait time is less than the minimum allowable wait times. Please respecify interval or wait times.

INVDAY, Invalid day specified, please re-enter

The day you entered in not valid. Please check for typing or spelling mistakes, and re-enter the command.

INVHOLIDAY, Invalid holiday specified

The date you entered in not valid. Please check for typing or spelling mistakes, and re-enter the command.

INVIDENT, Invalid identifier, wildcards not allowed

You have entered a wildcard with a UIC identifier. Please re-enter the command without wildcard or check for typing or spelling mistakes.

INVIDLELIM, Invalid set idle limits specified, max. must be greater than min.

The maximum or minimum idle limits you specified are not valid. Please check for typing mistakes, and re-enter the command.

INVLDBIO, Invalid bio threshold, default is 1

The BIO threshold you specified is invalid. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDBRDCST, Invalid broadcast type, must be USER1 to USER16

You have specified an invalid broadcast class. Check for typing or spelling mistakes, and re-enter the command.

INVLDCPU, Invalid CPU threshold, default is 3

The CPU threshold you specified is invalid. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDDEV, device is an invalid device for this node

The device you specified is not available on this node. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDDIO, Invalid DIO threshold, default is 0

The DIO threshold you specified is invalid. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDDSTLST, Invalid distribution list specified, please re-enter

The text you entered as a distribution list does not start with "@" or the length is equal to 1. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVLDFILNAM, Invalid file name

The file name you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVLDFRCWT, Invalid force wait interval, please re-specify

The force wait you specified is not between 5 and 60. Please check for typing or spelling mistakes, and enter command again.

INVLDIMGNAM, Invalid image name specified, please re-enter

The image name you specified was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVLDMINPRC, Invalid number of processes, re_enter between 0 and 999

The value for minimum number of processes must be between 0 and 999. Please re_enter.

INVLDOPCLASS, Invalid operator class specified, default is SECURITY

The operator class you specified is invalid. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDOPERCLS, Invalid operator class: class_name

The operator class you specified is invalid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVLDPRIO, Invalid base priority, default is 6

The base priority you specified is invalid. Please check command line for typing or spelling mistakes, and re-enter the command.

INVLDPRIV, Unknown Privilege: privilege, please check for typing mistakes

One of the privileges you tried to enter in the mask was invalid. Please check for typing or spelling mistakes, and re_enter.

INVLDTERM, Invalid terminal, terminals must end with a colon or have a wildcard

The terminal you specified either contains a colon and a wildcard or does not end in a colon. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVLDUSRNAM, Invalid username specified, please re-enter

The username you specified contains an illegal character or you specified a list when only a single username was allowed. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVLDVALUE, Invalid value entered, please re-enter with valid value

The value you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVMAXIDLE, Invalid maximum idle time, must be between 2 and 999

The value you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVMINIDLE, Invalid minimum idle time, must be between 2 and 999

The value you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVMINUTES, Invalid value specified for minutes.

There was an invalid value specified for the number of minutes. Please re-enter with a valid value.

INVMONTH, Invalid month specified, please re-enter

The value you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVOUTFILE, Invalid output file name, please re-enter

The file name you specified contains illegal characters or is too long. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVPRIMEDAY, You must enter /PRIME_START and /PRIME_END with /DAY

You must specify prime start and end times when you specify a day to be prime. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVPRIMETIME, Invalid time entered for a prime time, please re-enter

The time you specified is not valid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVSERVERNAME, Invalid server name, please re-enter

The server name you specified is not valid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVSETIDLE, You have entered an invalid idle time, please re-enter

The time you specified is not valid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVSTARTEND, You must enter /DAY to specify which day to modify

You must specify a day when you specify prime start and end times. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVSTATE, Invalid value specified for state.

The state specified is not valid. Please re-enter with a valid state,

INVTIME, Invalid time specified, please re-enter

The time you specified is not valid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVTIMEOUT, Invalid timeout specified, must be between 1 and 999

The time interval you specified is not valid. Please check for typing or spelling and typing mistakes, and re-enter the command.

INVUICFORMAT, Invalid UIC format, please enter in the format of [n,n]

The UIC format that you entered was invalid. Please check for typing or spelling mistakes, and re-enter the command.

INVUSERNAME, Invalid username, please re-enter

The username you specified contains illegal characters or you did not enter a username where one was required. Please check for typing or spelling and typing mistakes, and re-enter the command.

JOBREQ, Job required for this event

You must specify a job name for this event. Please check for typing or spelling and typing mistakes, and re-enter the command.

LIMITREQ, Limit required for this event

There must be a limit specified with this event. Please re-enter the event with a valid limit.

LOGCLOSE, Log file is already closed

The log file is already closed, type /LOG to reopen it.

LOGNTDFND, Logicals not defined, please check system table

Logical HITMAN_DAT is not defined. Please check system logicals and define if necessary.

MESSAGETOLNG, Specified message was too long, truncated to 200 characters

The message that you entered was too long. Message was truncated to 200 characters. No action necessary.

MINGEMAX, Minimum set idle time must be less than maximum set idle time

The minimum idle time must be less than the maximum idle time. Please check for typing mistakes, and re-enter the command.

MUSTSUPDSTLST, Must supply distribution list

You must specify a distribution list for this event.

NAMECHAN, Saiga Systems Idle Process Killer name changed

You have successfully changed HITMAN's name.

NOAUTH, No authorized users in list

You specified delete in the screen interface but there are no authorized users in the list.

NOAUTOIMG, No autohit images in list

You specified delete in the screen interface but there are no autohit images in the list.

NODELDEFAULT, Not allowed to delete default event records

You cannot delete default event records. You can only modify them.

NODETOOLNG, Specified nodename text was too long, truncated to 15 characters

You specified more than 15 characters for the nodename. Please check for typing or spelling and typing mistakes and re-enter the command.

NODISCONNECT, Disconnecting processes not allowed on AXP machines
You cannot use the disconnect feature on Alpha AXP systems.

NODISKINFO, Unable to collect disk information on device_name

HITMAN is unable to collect information on the device because the disk is not mounted or not available on this node. Please check for typing or spelling and typing mistakes, and re-enter the command.

NOEVENTFND, Event ID not found, no event deleted

The event ID you specified to delete does not exist. Please check for typing or spelling and typing mistakes, and re-enter the command.

NOHOLIDAYS, No holidays in list

You specified delete but there are no holidays in the list.

NOIDLE, No idle and warn users in list

You specified delete but there are no users in the list.

NOIMAGEEXIT, No image exit codes in list

You specified delete but there are no image exits in the list.

NOIMGDISC, No image disconnect entries in list

You specified delete but there are no images in the disconnect list.

NOLOGFILE, Log file does not exist in HITMAN_DAT: directory

The current log file is not found in the HITMAN_DAT directory. Please check HITMAN_DAT directory.

NONEXPR, Failure starting HITMAN, check console for typing or spelling mistakes

The HITMAN detached process had trouble starting, check console and HITMAN_ERROR.LOG for more information.

NONONPRIME, Non_Prime data file does not exist, please check HITMAN_DAT directory

The nonprime data file PERM_DATA_NONPRIME.DAT does not exist in the HITMAN_DAT directory. Please check for typing or spelling and typing mistakes, and re-enter the command.

NOPROTENTRY, No protected entries in list

You specified delete but there are no protected entries in the list.

NORIGHTS, Problem with SYS$FIND_HELD, possibly no rights database

You specified identifiers but you do not have a rights database.

NORMAL, Normal successful completion

The operation has been successfully completed.

NOSETIDLE, You are not allowed to use SET_IDLE

You have not been authorized by the system manager to use the set idle function.

NOSETIDLEENTRY, No set idle users in list

There are no users in the set idle list.

NOSUCHIDENT, No such identifier, please check for spelling mistakes, and re-specify

The identifier you specified does not exist. Please check for typing or spelling mistakes, and re-enter the command.

NOSUCHNODE, No such node is currently in this cluster

The node name you specified is unknown. Please check for typing or spelling and typing mistakes, and re-enter the command.

NOTDET, Image must be run as a detached process

The image HITMAN_DETACHED.EXE must be run as a detached process. It cannot be run interactively. To start the detached process, use $ HITMAN/START.

NOTPERMFILE, HITMAN tried to read a file that is not a permanent data file

The file HITMAN tried to use as a permanent data file is not a permanent data file. Ensure that the HITMAN logicals are properly defined.

NOTRUN, HITMAN is not running

The detached process for HITMAN is not running. This is an informational message. It does not represent an error. To start the process, use HITMAN/START.

NOUSRDISC, No user disconnect entries in list

You specified delete but there are no entries in the disconnect list.

NOWILD, Cannot specify wildcard for this field

You cannot specify a wildcard for this field.

NUMMESSTOLNG, Specified number of messages text too long, truncated to 2 characters

The text you specified for the number of messages contained more than 2 characters. Please check for typing mistakes.

PRCSSTP, Stopping HITMAN, Please wait ...

HITMAN requires some time to shut down. This should be no longer than 5 seconds.

PRCSSTRT, Starting HITMAN, Please wait ...

HITMAN requires some time to start up. This should be no longer than 5 seconds.

PRIVILEGEREQ, Privilege required for this event

A privilege is required for a Privilege Check event. Please check for typing or spelling mistakes, and re-enter the command.

PROCESSEXISTS, Process : process_name already exists in process protect list

The username you specified using the /PROTECT/PROCESS= qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

PROCESSNOTFOUND, Process : process_name was not found in process protect list

The username you specified using the /PROTECT/PROCESS= qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

PROCESSREQ, Process required for this event

A process name is required for a Missing event. Please check for typing or spelling mistakes, and re-enter the command.

PROCID, Identification of created process is nnnnnnnn

The process identification of the detached process is the number that was displayed. This is displayed as a result of the HITMAN/START command.

PROCNAMTOLNG, Specified process name too long, truncated to 15 characters

The process name you specified exceeds 15 characters. Please re-enter with fewer characters.

PROCTOOLONG, Process name too long, must be under 15 characters

The process name you specified exceeds 15 characters. Please re-enter with fewer characters.

PROUSEEXISTS, User : username already exists in user protect list, not added

The username you specified using the /PROTECT/USER= qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

QUEERROR, Error processing a monitor queue event

There was an error in processing the queue for the monitor queue event. Please verify the queue name.

QUENAMTOLNG, Specified queue name was too long, truncated to 31 characters

The queue name you specified was too long. Queue name was truncated to 31 characters. No action necessary.

QUEUEREQ, Queue required for this event

A queue name is required for this event. Please check for typing or spelling mistakes, and re-enter the command.

RECIGNOR, Record ignored in permanent data file

A record in the Permanent data file could not be understood by HITMAN. Please check HITMAN/LIST to make sure that all qualifiers are correct.

REQDETACH, Operation requires DETACH privilege

HITMAN requires the DETACH privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQEXQUOTA, Operation requires EXQUOTA privilege

HITMAN requires the EXQUOTA privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQOPER, Operation requires OPER privilege

HITMAN requires the OPER privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQPRMMBX, Operation requires PRMMBX privilege

HITMAN requires the PRMMBX privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQPSWAPM, Operation requires PSWAPM privilege

HITMAN requires the PSWAPM privilege to run. Make sure you have the appropriate privilege and re-enter the command.

REQSECURITY, Operation requires SECURITY privilege

HITMAN requires the SECURITY privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQSYSNAM, Operation requires SYSNAM privilege

HITMAN requires the SYSNAM privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQSYSPRV, Operation requires SYSPRV privilege

HITMAN requires the SYSPRV privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

REQWORLD, Operation requires WORLD privilege

HITMAN requires the WORLD privilege to run. Make sure that you have the appropriate privilege and re-enter the command.

RESEQEVENTS, Events have been resequenced

This informational message indicates that the HITMAN events have been resequenced.

RLINV, Right and left arrows invalid, press return to go to next field

You cannot use right and left arrows at this point.

RUNNING, HITMAN is already running

You specified HITMAN/START, and the detached process was already running.

SECGEWAIT, Second warn time is greater than or equal to wait time

The second warning time must be less than the wait time. Please check for typing mistakes, and re-enter the command.

SERVEREXISTS, Server: server_name already exists in Server protect list

You have tried to enter a duplicate server name. Please check for typing or spelling mistakes, and re_enter.

SERVERNOTFOUND, Server: server_name not found in Server protect list

A server ID that you tried to remove from the list does not exist. Please check for typing or spelling mistakes, and re_enter.

SERVNAMTOLNG, Specified server name was too long, truncated to 256 characters

The server name you specified was too long. Server name was truncated to 256 characters. Please check for typing or spelling mistakes, and re-enter the command.

SETIDLEEXISTS, User already exists in set idle list

The username you specified already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

STATEREQ, State required for this event.

You have entered an event which requires a STATE. Please re-enter the event with a valid STATE.

STOP, Hitman is stopping during a data collection

This message informs you that HITMAN was asked to shut down during a data collection. No action is required as the message is informational purposes.

SUBMITJOBNF, Specified submit job was not found, check spelling or create file

You specified a job to be submitted as an event action but the file does not exist.

TERMEXISTS, Terminal: terminal already exists in Terminal protect list

The terminal you specified using the /PROTECT/TERMINAL qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

TERMINALREQ, Terminal required for this event

A terminal name is required for this event. Please check for typing or spelling mistakes, and re-enter the command.

TERMNAMTOLNG, Specified terminal name was too long, truncated to 7 characters

The terminal name you specified was too long. Terminal name truncated to 7 characters. Please check for typing or spelling mistakes, and re-enter the command.

TERMNOTFOUND, Terminal: terminal was not found in Terminal protect list

The terminal you specified in the /PROTECT/NOTERMINAL qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

TEXTTOLNG, Specified text was too long, must be less than 60 characters

The text you specified was too long. Please check for typing or spelling mistakes, and re-enter the command.

TIMETOLNG, Specified time too long, use HH:MM format

The time you specified was too long. Please check for typing or spelling mistakes, and re-enter the command.

TOOMANYAUTH, User: username not added to Authorize list, too many users specified

More than the maximum number of authorized users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYAUTO, Image: image_name not added to Autohit list, too many images specified

More than the maximum number of autohit images were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer images.

TOOMANYEVEN, Too many events specified

More than the maximum number of events were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer events.

TOOMANYHOL, Holiday: date not added to Holiday list, too many holidays specified

More than the maximum number of holidays were specified. Maximum number is the parameter MAX_HOLIDAYS, currently 30. Please specify fewer holidays.

TOOMANYIDENT, Identifier: identifier_name not added to list, too many identifiers

More than the maximum number of protected identifiers were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer identifiers.

TOOMANYIDISC, Image: image_name not added to list, too many images disconnects

More than the maximum number of images were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer images.

TOOMANYIDLE, User: username not added to list, too many idle users specified

More than the maximum number of set idle users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYIMAGE, Image: image_name not added to Image list, too many images specified

More than the maximum number of protected images were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer images.

TOOMANYIMG, Image: image_name not added to Image protect list, too many images

More than the maximum number of protected images were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer images.

TOOMANYINDIV, User: username not added to list, too many individuals specified

More than the maximum number of users were specified with the qualifier /USER. Maximum number is the parameter MAX_INDIV_LEN, currently 256. Please specify fewer individuals.

TOOMANYPRIVS, Too many privileges are in the event to modify

You specified more than seven privileges in a PRIV_CHECK event which allows a maximum of seven. Please specify seven or fewer privileges.

TOOMANYPROCESS, Process: process_name not added to list, too many processes

More than the maximum number of processes were specified with the qualifier /PROCESS. Maximum number is the parameter MAX_INDIV_LEN, currently 256. Please specify fewer processes.

TOOMANYPROCS, MAXPROCESSCNT is greater than 1000, please call Saiga Systems

Your SYSGEN parameter, MAXPROCESSCNT, is greater than 1000 and HITMAN only handles 1000 processes. Please call Saiga Systems and we can customize HITMAN to suit your needs.

TOOMANYPROT, User: username not added to list, too many usernames specified

More than the maximum number of protected users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYRUN, Too many runaway processes are already defined

More than the maximum number of runaway processes were specified. Maximum number is the parameter MAX_LIST_LEN, currently 8. Please specify fewer runaway processes.

TOOMANYSERVER, Server: server_name not added to list, too many servers specified

More than the maximum number of servers were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer servers.

TOOMANYSETIDL, User not added to list, too many usernames specified

More than the maximum number of set idle users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYUDISC, User: username not added to list, too many user disconnects specified

More than the maximum number of users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYTERM, Terminal: terminal not added to list, too many terminals specified

More than the maximum number of terminals were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer terminals.

TOOMANYUDISC, User: username not added to list, too many user disconnects specified

More than the maximum number of users were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer users.

TOOMANYUIC, UIC: [g,m] not added to list, too many UIC's specified

More than the maximum number of UICs were specified. Maximum number is the parameter MAX_LIST_LEN, currently 256. Please specify fewer UICs.

TYPEREQ, TYPE qualifier required with /EVENT

You have tried to enter an event without the TYPE qualifier. Please re_enter the event with this qualifier.

UDISCNOTFOUND, User: username was not found in the user disconnect list

The user you specified using the /DISCONNECT/USER qualifiers does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

UICEXISTS, UIC: [g,m] already exists in the UIC Protect list

The UIC you specified using the /PROTECT/UIC qualifiers already exists in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

UICNOTFOUND, UIC: [g,m] was not found in UIC list

The UIC that you specified in the /NOUIC qualifier does not exist in the permanent data file. Please check for typing or spelling mistakes, and re-enter the command.

UNKWNPERMVER, Unknown permanent data file version

HITMAN has tried to read a permanent data file for which it cannot establish the version. If you have just installed a new version of HITMAN, you need to convert your permanent data file to the current version. Please refer to the section on conversions programs in this manual.

UPINTCHANGE, Invalid update interval, value has been modified

The update interval you entered was not a multiple of the dat